CUDY TR3000 v1.0 OpenWRT 在线云构建

玩机 > Router (545) 2026-06-15 17:04:17

OpenWRT云编译NEWIFI-D2

官方编译

替换组件

替换默认的wpad-basic-mbedtlswpad-openssl

预编译内置软件推荐

openwrt 25.x

luci-app-dawn luci-i18n-statistics-zh-cn kmod-bonding luci-i18n-base-zh-cn  lsblk cfdisk block-mount luci-i18n-ttyd-zh-cn lm-sensors luci-i18n-wol-zh-cn luci-i18n-upnp-zh-cn  iperf3 luci-i18n-samba4-zh-cn  kmod-usb-storage kmod-usb-storage-uas kmod-usb-storage-extras kmod-usb2 kmod-usb3 kmod-fs-vfat kmod-fs-ext4 kmod-fs-exfat ntfs-3g block-mount blockd

 

提示:luci-app-dawn 库 在最新的25版在线构建还没有中文的版本

 

luci-i18n-statistics-zh-cn  - 统计功能

首次启动时运行的脚本(uci-defaults)

# Beware! This script will be in /rom/etc/uci-defaults/ as part of the image.
# Uncomment lines to apply:

#WiFi配置
wlan_name="Cudy"
wlan_name_5g="Cudy_5G"
wlan_password="1234567890"

#root密码
root_password="password"

#内网配置
lan_ip_address="172.16.10.1"
lan_netmask="255.255.255.0"

#拨号配置(一般不建议配置)
#pppoe_username="111111"
#pppoe_password="111111"

#时区配置
zone_name="Asia/Shanghai"

#主机名
host_name="TR3000"

# 终端自动登录
ttyd_login="/bin/login -f root"


# log potential errors
exec >/tmp/setup.log 2>&1

if [ -n "$root_password" ]; then
  (echo "$root_password"; sleep 1; echo "$root_password") | passwd > /dev/null
fi

# Configure LAN
# More options: https://openwrt.org/docs/guide-user/base-system/basic-networking
if [ -n "$lan_ip_address" ]; then
  uci set network.lan.ipaddr="$lan_ip_address"
  uci set network.lan.netmask="$lan_netmask"
  uci commit network
fi

# Configure WLAN
# More options: https://openwrt.org/docs/guide-user/network/wifi/basic#wi-fi_interfaces
if [ -n "$wlan_name" -a -n "$wlan_password" -a ${#wlan_password} -ge 8 ]; then
  uci set wireless.@wifi-device[0].disabled='0'
  uci set wireless.@wifi-iface[0].disabled='0'
  uci set wireless.@wifi-iface[0].encryption='psk2'
  uci set wireless.@wifi-iface[0].ssid="$wlan_name"
  uci set wireless.@wifi-iface[0].key="$wlan_password"
  uci set wireless.@wifi-device[1].disabled='0'
  uci set wireless.@wifi-iface[1].disabled='0'
  uci set wireless.@wifi-iface[1].encryption='psk2'
  uci set wireless.@wifi-iface[1].ssid="$wlan_name_5g"
  uci set wireless.@wifi-iface[1].key="$wlan_password"
  uci commit wireless
fi

# Configure PPPoE
# More options: https://openwrt.org/docs/guide-user/network/wan/wan_interface_protocols#protocol_pppoe_ppp_over_ethernet
if [ -n "$pppoe_username" -a "$pppoe_password" ]; then
  uci set network.wan.proto=pppoe
  uci set network.wan.username="$pppoe_username"
  uci set network.wan.password="$pppoe_password"
  uci commit network
fi


# 时区
if [ -n "$zone_name" ]; then
  uci set system.@system[0].zonename="$zone_name"
  uci set system.@system[0].timezone='UTC-8'
  uci commit system
  /etc/init.d/system reload
  else echo "区域未执行: zone_name"
fi

# 主机名
if [ -n "$host_name" ]; then
	uci set system.@system[0].hostname="$host_name"
    uci commit system
    uci set luci.languages.zh_cn='简体中文 (Chinese Simplified)'
    uci set luci.main.lang='zh_cn'
    uci commit luci
    else echo "区域未执行: host_name"
fi


# 终端自动登录
if [ -n "$ttyd_login" ]; then
   uci set ttyd.@ttyd[0].command="$ttyd_login"
   uci delete ttyd.@ttyd[0].interface
   uci commit ttyd
   else echo "区域未执行: ttyd_login"
fi

# fstab 配置参考 
# https://openwrt.org/docs/guide-user/storage/usb-drives?s[]=uci&s[]=fstab&s[]=anon&s[]=mount
# 启用自动挂载未配置磁盘
uci set fstab.@global[0].anon_mount='1'
uci commit fstab

# 国内软件源
# 24.x及以前的版本
#sed -i 's_https\?://downloads.openwrt.org_https://mirrors.tuna.tsinghua.edu.cn/openwrt_' /etc/opkg/distfeeds.conf

# openwrt 25.x 更换为apk软件包管理,替换国内源
sed -i 's_https\?://downloads.openwrt.org_https://mirrors.tuna.tsinghua.edu.cn/openwrt_' /etc/apk/repositories.d/distfeeds.list

# NAT 硬件加速启用
uci set firewall.@defaults[0].flow_offloading=1
uci set firewall.@defaults[0].flow_offloading_hw=1
uci commit

echo "All done!"

 


评论
User Image
提示:请评论与当前内容相关的回复,广告、推广或无关内容将被删除。

相关文章
OpenWRT云编译NEWIFI-D2官方编译https://firmware-selector.openwrt.org/https://firmware-se
1 刷入官方给的过度固件官方过度固件存放路径: tr3000\CUDY官方\TR3000刷OpenWRT固件教程\1_中间固件\cudy_tr3000-v1-s
版本v1硬件参数ModelTR3000版本v1CPUMediaTek MT7981BACPU MHz1300CPU Cores_numcores2Flash M
开始刷机路由器官方系统的后台管理地址是 192.168.10.1,初次进入会要求你设置密码,然后就是一路随便点,完成初始化,随后就进入到主页。我手上这台的 FW
OpenWRT云编译NEWIFI-D2官方编译https://firmware-selector.openwrt.org/预安装的软件包追加部分luci-i18
预安装的软件包追加部分luci-i18n-base-zh-cn lsblk cfdisk block-mount luci-i18n-ttyd-zh-cn l
openwrt 在线编译官网OpenWrt Firmware Selector 默认openwrt编译组件查看打开在线编译网站后,选个机型,这里以小米3G路由器
替换组件替换默认的wpad-basic-mbedtls为wpad-mesh-openssl附加组件 luci-app-dawn luci-i18n-base-z
清华openwrt软件源配置执行命令配置:sed -i 's_https\?://downloads.openwrt.org_https://mirrors.
openwrt ttyd 拒绝连接 无法打开ssh窗口解决办法。
immortalwrt/openwrt 物理x86设备安装教程,包括资源下载基础配置等。
[OpenWrt Wiki] Setting up DAWN and band-steeringSetting up DAWN and band-steerin
OpenWRT 24.10端口转发配置打开防火墙网络-&gtl;防火墙 配置端口转发切换到端口转发(Port Forwards)菜单添加转发规则模拟需求 1 转发808
openwrt 23.05.x 卸载某些软件后报错Unhandled exception during request dispatchingmodule 'luci.ucodebridge' ...
根据红米 XIAOMI REDMI AC 2100的不同breed 刷入OpenWRT刷入方式不同。例如本例中,刷入OpenWRT需要两个文件OpenWrt F